Homemaker XQB50-808GF Instruction Manual page 12

Operation instructions
Step six: Start the washing machine
Press "START/PAUSE" button, the washing machine will buzz and run automatically.
Please close the wash lid completely (otherwise, the machine will stop running
when it go to the spin program and give alarm.)
Note:
If you want to change the program when the washing machine is running, you must
press the "START/PAUSE" to hold at first.
The water level can be changed when the washing machine is running. If you change the
water level to the higher one when the washing machine is running, the washing machine
will stop running and fill water to match the level you choose at last and then begin
running again automatically.
Program
Microcomputer saves up 4 kinds of washing programs, pleas refer to the following washing
program form.
Regarding soak wash program, clothes will be actively soaked for 10-30 minutes , then begin
to work under normal wash program, so as to improve the clean ratio.
Note: 1.The total operating time may vary according to water volume, tolerance is permitted.
2.In case the unbalance of laundry trigger the safety switch into action when spinning, the
machine will automatically refill water to adjust the balance.
The power will be automatically switch off after finish washing.
Please close the wash lid completely.
Washing program form
Soak
Program
(min)
Select the exact time according to the quantity and quality
Fuzzy
of the wash laundry itself.
20
Normal
30
Strong
Speed 10
Gentle 10
Rinse
Wash
(min) (cycle)
2
20
2
12
1
5
2
12
Spin
(min)
5
5
2.5
5