MTD 200 Series Operator's Manual page 9

Hide thumbs Also See for 200 Series:

Controls & Features

Tine Clutch

Control

Handle Knobs

)ept h_ _

Stake

Depth

NOTE:This Operator's Manual covers several garden tiller

models. The tiller depicted may differ from yours.

WARNING! Before operating your machine, carefully

read and understand all safety, controlsand

operating instructions in this manual and on the

decals on the machine. Failure to follow these

instructions can result in serious personal injury.

EngineControls

For detailed information on all engine controlsrefer to the

separate Engine Operator's Manual.

Figure 44

Handle Knobs

The handle height may be adjusted. Loosen the knobs and

remove the carriage bolts to change the position. Reinstall and

tighten the hardware when complete.

RearWheelwith Depth Stake

The rear wheel can be raised and lowered for transport and

storage. Refer to the Maintenance & Adjustments Section for

instructions on depth stake adjustment and the Assembly & Set-

Up Section for instructions on wheel adjustment.

TineClutchControl

The clutch control

lever is located

on the upper handle.

Squeezing

the lever against the handle engages the tine drive.

Release the lever to stop the tines from turning.