Rear View; Rear Panel - Sanyo VMC-8521P Instruction Manual

REAR VIEW

<Rear Panel>
A
IN
IN
VIDEO
B
IN
OUT
A
IN
AUDIO
B
IN
REMOTE
IN
16 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
(
terminals .
* Also refer to the Basic connection Example on pages 10
and 11.
17 Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
)
terminals .
* Also refer to the Basic connection Example on pages 10
and 11.
18 Video B (Y/C) terminals
[VIDEO B Y/C IN/OUT]
Y/C (S-Video) signal input (IN) and output (OUT)
terminals.
The output terminal is bridge-connected.
IN : Y/C-separated (S-video) signal input terminal
OUT : Bridge-connected Y/C-separated (S-video) signal
output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
)
terminals .
* Also refer to the Basic connection Example on pages 10
and 11.
19 Audio A terminal [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding the VIDEO A terminals
terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
OUT
OUT
Y/ C
OUT
OUT
OUT
^
. The output
A IN OUT
IN OUT
VIDEO
B
IN
Y/ C
OUT
A IN
OUT
AUDIO
B IN OUT
REMOTE IN OUT
To AC outlet
(230 V AC, 50/60 Hz)
Notes:
* For corresponding video signals, use the VIDEO A
^
terminal .
* Also refer to the Basic connection Example on pages 10
and 11.
20 Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio signals
corresponding to the VIDEO B terminals
*
C) terminals . The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
&
terminals or VIDEO B (Y/C) terminals
* Also refer to the Basic connection Example on pages 10
and 11.
21 Remote terminals [REMOTE IN/OUT]
Input (IN) and output (OUT) terminals for external control.
The output terminal is bridge-connected. External control
is available either to select the ASPECT RATIO or to
select ON or OFF in BRIGHTNESS P.S. function mode.
Set the external control in the <SET-UP MENU> screen
mode.
External control
functions
ASPECT RATIO
BRIGHTNESS P.S.
Note:
* Also refer to the Basic connection Example on pages 10
and 11.
22 AC Inlet [AC IN]
Power input connector. Connect the provided AC power
e
cord to an AC outlet (230 V AC, 50/60 Hz).
23 Power cord
Connects the provided power cord (230 V AC, 50/60 Hz)
to the AC IN connector.
&
or VIDEO B (Y/
*
.
External control switch
Open circuit Short circuit
(open) (short)
4–3 (4:3) 16–9 (16:9)
OFF ON
4