C Ontrol Panel - Samsung WA95W9 User Manual

setting up your washer
CONTROL pANeL
For more details, see control panel of your washing machine.
9 8
1
poWer buTTon
2 sTArT/pAuse buTTon
3
progrAm selecT buTTon
4
filTer check
chilD-lock funcTion
5
(opTion)
remAining Time, DelAy
6
sTArT Time, error DisplAy
7 Air Turbo buTTon
8
funcTion buTTon
9
WATer leVel buTTon
6_Setting up your washer
WA95W9-02898M-01_EN.indd 6
7 6 5 4
Press this button once to operate. Press it again to turn the power off.
Use to pause and restart the operation. To change the washing procedure
during an operation, press this button to stop, and again to restart after
changing the procedure.
Each time the button is pressed, the washing program changes;
Fuzzy  blanket  Delicate  quick  soak  Water Saving
When the wash is finished, the warning lamp lights up on the filter check.
When the door is opened, it turns off. (This is not a fault.) When the Magic filter
is clogged, foreign materials may start sticking to the laundry. To ensure a clean
wash, please remove foreign materials from the filter after every wash.
This is a device to protect children from being accidentally hurt while playing with
the washer.
• How to start the Child-Lock function:
- Press the "Power" button to go to an initial washing mode.
- By pressing "Start/Pause" button, you start washing and in case Child Lock
function is needed during the laundry
- Press both the "Rinse" and "Spin" buttons at the same times.(for 3
seconds) (Note: You cannot perform the function without the "Power"
button on. If the Child Lock function is activated, the Child Lock icon
blinks.)
• To release the function of Child-Lock: In case the "Child-Lock" is
programmed, press both the "Rinse" and "Spin" buttons at the same time.
Displays the remaining wash time. Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine so that you
can take action.
Press this button to speed dry your laundry.
This function can only be selected if a spin cycle is set.
With every press of this button, the function changes; Wash,Rinse,Spin  Wash
Rinse SpinWash&RinseRinse&Spin Wash,Rinse,Spin
The water level is automatically adjusted. However, you can select the water
level manually by pressing this button.
Mid  High  Mid  Low  Extra low  Low  Mid
3 2 1
2012-12-18 5:08:51