Save & Exit - MSI Z97-G43 GAMING Owner's Manual

▶ User Password
Sets User Password for system security. Enters the user password if set; but user
might have limited rights to change the BIOS items.
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶ Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
▶ Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to
[Enabled] later. [Options: Disabled, Enabled, Reset]
Save & Exit
▶ Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes
and exit BIOS setup.
▶ Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶ Save Changes
This item is used to save current changes.
▶ Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶ Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
▶ Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
be a boot device to start booting.
BOIS Setup BOIS Setup 3-16 3-16