Hitachi PJ-TX100 Service Manual page 4

STANDBY/ON button
prepares for turning the power
on/off.
POWER indicator
tells the state of power supply.
MENU button
operates the menu function.
INPUT button
toggles between the
signal ports.
COMPONENT
VIDEO
S-VIDEO
VIDEO
DVI-D
COMPUTER
Remote control transmitter
POWER button
prepares for turning the
power on/off.
(the same as the
STANDBY/ON button above.)
OPT BLK button
toggles between the
modes for the optical black.
ASPECT button
toggles between the modes for
the aspect ratio.
Cursor buttons
(the same as the above.)
MENU button
(the same as the above.)
BRIGHT buttons
controls the brightness of the
whole screen.
DVI button
selects the DVI-D port input.
PC button
selects the COMPUTER port input.
COMPO button
selects the COMPONENT
VIDEO port input.
PJ-TX100(C11H)
TEMP indicator
STANDBY/ON
lights or blinks when any problem about
internal temperature has happened.
LAMP indicator
TEMP
POWER LAMP
light or blinks when any problem about
the lamp has happened.
Cursor buttons
works for adjusting or menu controlling.
MENU ENTER
ENTER button
proceeds to the next operation at the
menu functions.
INPUT RESET
RESET button
cancels the adjustment in progress.
* Note that the items whose functions
are performed simultaneously with
operating are nor reset.
MODE button
toggles between
the modes for the
picture type.
POWER LIGHT
OPT BLK MODE MEMORY
ASPECT IRIS
ENTER
MENU RESET
BRIGHT CONTRAST COLOR
DVI PC AUTO
COMPO S-VIDEO VIDEO
4
LIGHT button
turn on/off the back light for
the remote control buttons.
MEMORY button
toggles between your
adjustments.
IRIS button
toggles between the modes
for the iris.
ENTER button
(the same as the above.)
RESET button
(the same as the above.)
CONTRAST buttons
controls the contrast of the
whole screen.
COLOR buttons
controls the color of the whole
screen.
AUTO button
executes automatic
adjustment.
VIDEO button
selects the VIDEO port input.
S-VIDEO button
selects the S-VIDEO port input.