Advertisement
CD, Radio & 3.5mm Line In
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Open the Disc door.
2. Load a CD or CD-R/RW disc into the unit,
label side facing up.
3. Close the Disc door.
4. Press the Play/Pause button to begin playing
the loaded CD. Press the Skip/Search buttons
to cycle through different tracks.
Programming a CD
1. Press the STOP button to stop the CD.
2. Press the PROGRAM button.
3. Press the SKIP/SEARCH buttons to select a
track from the loaded CD to play first.
4. Press the PROGRAM button.
5. Repeat steps 4 and 5 to program tracks from
the loaded CD to play in the order they are
selected.
6. Press the PLAY/PAUSE button to begin playing
the programmed CD.
7. Press the STOP button twice to cancel
the program.
Clock & Alarm
Setting the Clock
1. Press the POWER button to turn the system off.
2. Press and hold the TIME button.
3. While holding the TIME button, press the
HOUR and MIN buttons to set the time.
4. Release the TIME button to finish setting
the clock.
Setting the Alarm
For assistance, refer to LCD Display Alarm Modes
diagram to the left.
1. Press the POWER button to turn the system off.
2. Press and hold the AL SET button.
3. While holding the AL SET button, press the
HOUR and MIN buttons to set the time.
4. Release the AL SET button to finish setting
the alarm time.
Customer Support: 1-888-999-4215
HC221B-1249-01-IB.indd 7
Listening to the AM or FM Radio
An AM/FM antenna is built into the music system.
Adjust the position of the music system to adjust
radio reception.
1. Press the POWER button to turn the player on.
2. Press the CD/RADIO button to switch
to radio mode.
3. Press the AM/FM button to switch between
AM and FM mode.
4. Turn the TUNING dial to adjust the AM or FM
radio station.
3.5mm Line In
Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the 3.5mm
Line In on the music system and an audio
output on an MP3 player or other audio source.
2. Use the native controls on the connected MP3
player or other audio source to play, pause, and
control music output through the connected
music system.
3. When the 3.5mm Line In is connected, CD
mode and Radio mode will be deactivated.
5. Press the AL OFF/ON button to activate the
alarm.
6. While holding the AL SET button, press the
MUSIC/BUZZER button to switch between
CD, Radio or buzzer. Note : If set to Radio or CD
please make sure a CD is placed in the unit and
the radio is tuned. Refer to CD or Radio section.
7. When the set alarm time is reached, the music
system will power on and alert you using the
set mode.
Cancelling the Alarm
1. Press the AL OFF/ON button to activate or
deactivate the alarm.
2. An alarm icon will appear on the display when
the alarm is activated.
7
1/20/2015 3:43:23 PM
Advertisement
