Jensen VX3012 Operation Manual page 33

Receiving a Call
By default, all incoming calls are received automatically.
1. If there is an incoming call, the screen will display "Incoming call...".
2. Touch the screen to select [ hang up ] or [ Answer ].
Speak into the BT microphone.
Tip
You can select to receive calls manually by setting
[Auto Answer] to [OFF]
Adjust BT Settings
1. In BT menu, touch [ Options ]. The
option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [BT]: To turn the "BT" function ON or OFF.
∙ [Auto connect]: To turn the "Auto Connect" function ON or OFF .
∙ [Auto answer]: To turn the "Auto Answer" function ON or OFF .
∙ [Pairing code]: To set the paring code.
∙ [Phone synch]: To synchronize phone book, touch [ OK ] on the sub-menu
NOTE:
• You can also adjust BT settings in the "Settings" menu.
Downloaded from www.Manualslib.com
Figure 27. BT Incoming Call Screen
P h o n e b o o k S y n c h m a y t a k e s e v e r a l m i n u t e s t o
load on initial setup.
Figure 28. BT Settings Menu
manuals search engine
33
VX3012