First-Time Configuration - D-Link DHP-W311AV Quick Installation Manual

First-time Configuration

1. Use your web browser to go to:
Windows: http://dlinkapWXYZ or http://dlinkap
Mac OS: http://dlinkapWXYZ.local. or http://dlinkap.local.
Where WXYZ is the last 4 digits of the MAC address. The full address is
available on the included Wireless Configuration Card.
2. Select ADMIN for the User Name and leave the Password blank.
3. From the landing page, start the Setup Wizard for Powerline Connection.
4. When prompted, press the Common Connect Button for 2 seconds on the
DHP-308AV to connect it to the DHP-W310AV.
Note: If you have not previously secured your existing Powerline network,
you will need to set up security for all of your existing Powerline devices.
Perform the following steps for each device: press the Common Connect
Button on the DHP-W310AV, then press the Simple Connect Button on your
existing Powerline device within 2 minutes.
5. Follow the wizard's steps to set up your Powerline network. For more
detailed support, please refer to the User Manual.
4
DHP-W311AV