Jeep grand cherokee 2014 User Manual page 108

ELECTRONICS
Complete The Pairing Procedure
• When prompted on the phone, verify with radio password shown on the Uconnect
Screen.
• If your phone asks you to accept a connection request from Uconnect
"Yes". If available, check the box telling it not to ask again – that way your phone
will automatically connect each time you start the vehicle.
Select The Mobile Phone's Priority Level
• When the pairing process has successfully completed, the system will prompt you
to choose whether or not this is your favorite phone. Selecting "Yes" will make this
phone the highest priority. This phone will take precedence over other paired
phones within range. Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Press the "Uconnect
on your steering wheel to begin.
Making A Phone Call
• Press the Uconnect
• After the BEEP, say "dial" then the number (or "call" then the name as listed in
your phone; see Phonebook).
NOTE:
You can also initiate a call by using the touchscreen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect
button .
• To end a call, press the Hang Up or Phone button
Mute (Or Unmute) Microphone During Call
• During a call, press the "Mute" button on the touchscreen on the Phone main
screen to mute and unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
• During an on-going call, touch the "Transfer" soft-key on the Phone main screen
to transfer an on-going call between handset and vehicle.
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212"
• "Call Emergency"
• "Call Towing Assistance"
• "Redial"
106
Phone button
®
.
® , press the Phone
.
®
® , select
® Phone" button