Setting The Clock - Wolfgang Puck CCDCM030 Use And Care Manual

Table of Contents

Advertisement

Using Your Coffee Maker
1
Place your drip coffee maker on a flat, level surface, such as a
countertop. Plug unit into a 120 volt 60Hz AC-only outlet.
2
Lift the top cover of the coffee maker straight up.
3
Your coffee maker comes equipped with a permanent coffee filter;
however, a cone paper filter may be used instead if desired (8 to
12-cup size). To add coffee grounds to the filter first rotate the spray
head counterclockwise until it is over the water reservoir. Place the
desired amount of ground coffee into the filter and swing the spray
head back into position and close the lid. See the chart below to
determine the amount of coffee to use.
Recommended amount of coffee
Number of Cups
2
4
6
8
10
12
Note:
We recommend using coffee ground specifically for automatic
drip coffee makers. After using your coffee maker a few times, adjust
the amount to suit your own taste.
4
Fill glass carafe with cold water up to the marked level for the
desired amount of coffee. Pour water from carafe into water reservoir.
Close the top cover of the coffee maker. Place glass carafe, with lid in
place, on the warming plate.
Important: Do not operate your coffee maker if the filter basket does
not close completely. Use only cold water; the automatic brewing
system has been designed to work only with cold water.
Note: An overflow hole is located at the back of the water reservoir
to prevent overfilling. Do not add water past the MAX line on indicated
on the water reservoir viewing window.
5
Press the ON/OFF button once. The blue power indicator light will
illuminate indicating that your coffee maker has begun the brewing
cycle. If you wish to use the timer to preset the coffee maker, see the
section on "Using the Timer". In a few minutes, your coffee maker will
be finished brewing fresh coffee.
6
When the brewing cycle is complete, your coffee maker will
automatically switch over to a warming mode, which will keep
the coffee warm for the next two hours.
8
Recommended
2 Tbsp.
4 Tbsp.
6 Tbsp.
1/2 Cup
1/2 Cup + 2 Tbsp.
3/4 Cup
Pause & Pour Feature
Your coffee maker has been designed with a Pause & Pour feature.
At any time during the brewing cycle, you may temporarily remove the
glass carafe from the unit and pour hot coffee from the carafe. The
brewing cycle will be interrupted and no coffee will drip from the filter
basket. Replace the carafe on the warming plate to restart the brewing
process.
Warning:
Return carafe within 30 seconds if removed during brewing or filter
basket may overflow.
Caution:
Coffee maker will remain ON for 2 hours unless it is turned OFF. Do not
leave an empty carafe on heated warming plate.
Auto Shut Off
As an added convenience, your coffee maker has been designed with an
auto shutoff feature. Two hours after the brewing cycle is complete, the
coffee maker will automatically shut itself off.

Setting The Clock

Press the PROGRAM button until you see the CLOCK indicator display on
the screen. Press the HOUR button until the desired time is reached. You
can hold the hour button down to scroll at a faster rate. Ensure that you
have the correct hour of the day set as it relates to AM or PM. The AM or
PM indicator is displayed to the left of the time. For the minute setting
press the MINUTE button until you reach the desired time. You can hold
the MINUTE button down to scroll at a faster rate.
Once the correct time has been set, do not press any buttons. After 15
seconds the clock will leave the "Set Time" mode, and the blue backlight
will go out.
Note:
Unplugging the unit will reset the clock to 12:00.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents