Centre High-Mounted Brake Light - Vauxhall movano Owner's Manual

172 Vehicle care
5. Reattach wiring connector.
6. Install lamp assembly into
aperture and push to the left to
secure.
Mirror turn signal lights
1. Move the lower mirror assembly
from the front to access the screw.
2. Remove the screw using a torx
screwdriver.
3. Remove bulb holder from the rear
of the lower mirror assembly.
4. Renew bulb.
5. Replace bulb holder.
6. Replace the screw.
Centre high-mounted brake
light
1. Remove cover from the inside of
the rear door.
2. Unscrew the nut from the locating
pin at the rear of the lamp
assembly.
3. Remove the lamp assembly from
the aperture on the outer side.
4. Detach wiring connector from
lamp assembly.
5. Remove bulb holder from lamp
assembly and renew bulb.
6. Install bulb holder in lamp
assembly and reattach wiring
connector to lamp assembly.
7. Replace lamp assembly into
aperture, ensuring that it is seated
correctly.