Sony VPL-GH10 Operating Instructions Manual page 51

Network Setting
You can configure the network settings such as IP address,
Subnet Mask, Default Gateway, and DNS Server when accessing
the projector from a computer or using the supplied application
"ImageDirector3."
IP Address Setup
Select either "Auto (DHCP)" or "Manual." When you select
"Manual," you can set "IP Address," "Subnet Mask," "Default
Gateway," "Primary DNS" and "Secondary DNS." After completing
all the settings, select "Apply" using the m button, then press the
button.
IP Address
Sets the IP Address of the projector.
(1.0.0.0 to 223.255.255.255)
Subnet Mask
Sets the Subnet Mask of the projector.
(1.0.0.0 to 255.255.255.255)
Default Gateway
Sets the Default Gateway of the projector.
(1.0.0.0 to 223.255.255.255)
Primary DNS
Sets the DNS server to be used as a priority.
(1.0.0.0 to 223.255.255.255)
Secondary DNS
Sets the alternative DNS server.
(1.0.0.0 to 223.255.255.255)
MAC Address
Displays MAC address of the projector. You cannot change this
setting.
51
GB