Turning On Your Monitor; Power Indicator Light - Commodore 1902 User Manual

TURNING ON YOUR MONITOR
After connecting your monitor to the computer and inserting one
end of the gray power cord into the AC receptacle on the back of
the monitor and the three-pronged electrical plug end into a
power outlet, you are ready to turn on your monitor. Follow these
simple steps:
1. Turn the monitor on by pushing down the power switch. The
POWER INDICATOR LIGHT on the front of the monitor shows
you when the power is on. Always turn the monitor on BEFORE
you turn the computer on.
Later, when you're ready to turn the power off, press the power
button again. The button will pop back up and the power light
will go out.
2. Turn your computer on. You can tell that both the monitor and
the computer are working correctly when the monitor displays
a message like one of these:
Different computers display other opening messages. If you
don't know what message to expect, see your computer's user
manual.
7