Care & Maintenance - AcuRite 06027 Instruction Manual

Problem
Sensor not recognized /
duplicated data
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Care & Maintenance
Display Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
If the Home Environment Display is being used with
more than one Temperature & Humidity Sensor
(06002RM), the A-B-C switch positions must differ
between each sensor.
1. Remove the batteries from the Temperature &
Humidity Sensors.
2. Locate the A-B-C switch inside the battery
compartment of each sensor.
3. Verify that each sensor has a different channel
selected by checking the switch position (no sensors
should share the same letter).
Note:
Locations may need to be deleted and setup
under the correct A, B, or C channels (see page 11).
16 16
Possible Solution