Toshiba Canvio AeroCast User Manual page 19

Hide thumbs Also See for Canvio AeroCast:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
On/Off button:
Press and hold for 2 seconds: Wireless LAN mode turns ON.
Press and hold for 2 seconds again: Wireless LAN mode turns OFF.
If the battery is too low, you cannot turn the Canvio AeroCast Wireless
NOTE
Hard Drive ON. The battery indicator will blink Orange for 6 seconds, and
then turn off.
USB 3.0 port:
Compatible with USB 3.0 and USB 2.0.
Allows for data transfer between a computer and the Canvio AeroCast
Wireless Hard Drive, when connected.
Allows you to charge the product battery when connected to the AC
adaptor.
Battery Indicator light:
Green: 30% or more available battery power.
Yellow: 10%-30% remaining battery power.
Orange (blinking fast): the product is out of battery power or the
operating temperature is too high. the product will shut down after 30
seconds.
Green or Yellow (blinking slowly): The battery is charging.
Green (Not blinking): Finish charging
Green or Yellow (blinking fast): The product is shutting down or turning
ON.
LED Off: The device is powered OFF.
Wireless LAN/HDD indicator:
Wireless LAN Mode
USB Mode
SD™ Card indicator:
Only glows in Wireless LAN Mode
User's Manual
Blue: Wireless LAN is ON (no data access).
Blue (blinking): Wireless LAN is ON (storage access available).
Blue (turned off): Wireless LAN is OFF.
White: No data access.
White (blinking): Data access available.
White (turned off): The device is in Sleep or Standby mode. It is safe
to disconnect the device.
Violet: No SD™ Card access.
Violet (blinking): SD™ Card access available.
Violet (turned off): SD™ Card is in Standby.
CANVIO AEROCAST WIRELESS HARD DRIVE
EN-19

Advertisement

Table of Contents
loading

Table of Contents