Advertisement
Host (cont'd)
3) The default state of the TriplePlay hardware is Pitch Bend Range of +/- 12. If possible, set the pitch bend
range of your sound module instruments to match this specification. Failure to do this may result in issues
with string bending, slides and hammer-ons.
4) Connect your guitar's traditional pickup output to guitar in on the FC-1. Connect guitar out to your
electric guitar amplifier.
5) Using the patch – and patch + switches will send program change commands to your connected
sound module or other device. The hold/loop button will provide sustain if that feature is available on your
selected sound. The guitar/mix/synth switch on your instrument's TriplePlay controller will toggle between
your guitar and MIDI sounds.
FC-1 Software
Functionality of your FC-1 switches, displayed information, and TriplePlay hardware patch parameters can all
be modified using our TriplePlay application (v1.3 or higher). Tracking can be improved by using multi-
timbral instruments with the TriplePlay controller in MONO Mode. Consult the complete online documenta-
tion for details.
4
Advertisement
