Clear Bios Password Jumper - MSI MS7797 Getting Started

Getting Started
CLR_PWD1: Clear BIOS Password Jumper
The jumper is used to clear the BIOS password. If you want to clear the BIOS password,
set the jumper to clear password.
Important
Please refer to the below steps to clear the password:
1. Power off the system.
2. Short pins 2-3.
3. Turn on the system to POST screen.
4. Shut down the system.
5. Short pins 1-2.
6. Boot up the system.
1-22
1
Normal Clear Password
1