Fan Mode - Akai AK-9000-F User Manual

Instructions (Cont.)

Fan Mode

In Fan mode only the air conditioner's ventilation will be working. Setting a
temperature in this mode will be ineffective.
• Press the MODE button repeatedly until Fan mode is selected.
• The default speed for Fan mode is LOW. Press the SPEED button,
repeatedly, to select another fan speed (MID, HIGH).
• Press the ON/OFF button to start operation. The operation indicator will
come on, the air conditioner will start working in Fan mode.
• Press the ON/OFF button again to stop the air conditioner.
Drying (Dehumidifying) Mode
In this mode the air conditioner will alternate cooling and fan only cycles to
reduce the humidity in the air, making the room more comfortable.
• Press the MODE button repeatedly until Dry mode is selected.
• Press the or
16°C to 32°C.
• Press the SPEED button to select the fan speed from the following
options: LOW, MID, HIGH, AUTO.
• Press the ON/OFF button to start operation. The set temperature will be
displayed on the wall unit display and the air conditioner will start working
in Drying mode.
• Press the ON/OFF button again to stop the air conditioner.
Manual Stopping and Starting
When the remote control does not work or cannot be found, please follow the
steps below to start or stop operation.
• Lift the top cover open and locate the AUTO button in the position below.
• If the unit is operating, press the AUTO button to stop operation.
• If the unit is not operating, press the AUTO button to start operation.
button to set the temperature, in one degree steps, from
After Sales Support
1300 886 649 | info@tempo.org
15