Switching Off; Overload Cutout - Stihl MSE 140 C Instruction Manual

Switching Off

1
2
Release the trigger switch so that it
N
can return to the off position (1). It is
locked in this position by the trigger
switch lockout.
The coasting brake brings the chain to a
standstill.
WARNING
If the trigger switch is held in position 2,
the coasting brake is not activated and
the chain will continue running for
several seconds.
During longer work breaks – disconnect
the plug from the power supply.
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C

Overload Cutout

The overload cutout interrupts the power
suppy to the saw in the case of
mechanical overload due to, e.g.
excessive infeed force
–
"lugging down" the motor
–
pinching the saw chain in the cut
–
If the overload cutout has interrupted the
power supply:
Pull the guide bar out of the cut.
N
If necessary, disengage the chain
N
brake – see "Chain Brake".
MSE 140 C, MSE 160 C, MSE 180 C
Wait for the overload cutout to cool
N
down.
1
Press the pushbutton (1) – if the
N
motor does not run when you switch
on, the overload cutout has not yet
cooled down sufficiently – wait a
while and then press in the
pushbutton again as far as stop.
When the motor restarts:
Run the motor off-load for about 15
N
seconds. This cools the motor and
helps prevent the overload cutout
tripping again.
MSE 200 C
The MSE 200 C is equipped with an
electronic overload cutout to monitor
motor temperature and power
consumption.
1
The indicator lamp (1) comes on in
N
the event of overload and the power
supply is interrupted – the lamp
goes off after about 2 seconds and
the machine is again ready for
operation.
Run the motor off-load for about 15
N
seconds. This cools the motor and
helps prevent the overload cutout
tripping again.
The indicator lamp glows only as long as
the trigger switch is operated.
The indicator lamp flashes briefly to
confirm it is functioning every time the
motor is switched on.
English
23