Operation With Dvd, Video Cd And Audio Cd; Playing A Dvd, Video Cd And Audio Cd; Exchanging Discs During Playback; Skipping Discs - NAD T 572 Owner's Manual

Operation with DVD, Video CD and Audio CD

Playing a DVD, Video CD and Audio CD

Playback Setup
Turn on the TV and select the video input source
corresponding to the DVD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your disc in the tray, with the label facing
2 2
up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
• Discs can be loaded one at a time by pressing
NEXT DISC to rotate the carousel.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu may appear instead.
If a disc menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD that contains a menu.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter
and additional selections you want, then press
SELECT/ENTER to start playback.
Press TITLE or MENU to return to the disc menu
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the disc menu screen.
Menu setting and the exact operating procedures for
using the disc menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
13.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 14).
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
DVD VCD2.0 VCD1.1

Exchanging discs during playback

Press OPEN/CLOSE on the front panel during play-
back to open the disc tray.
CD
Press NEXT DISC to rotate the disc trays to the
desired position. The carousel will rotate clockwise by
one disc increments.
Exchange the discs and press OPEN/CLOSE to close
the disc tray.
Note
– The disc tray presently loaded in the play position can
not be exchanged.

Skipping discs

Press NEXT DISC during play or when playback is
stopped.
Notes
– When NEXT DISC is pressed, the disc tray rotates
and playback begins from the beginning of the next
disc.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
– When NEXT DISC is pressed during playback of disc
5, playback of disc 1 will start.

Exchanging the disc and starting playback

1. Press OPEN/CLOSE during playback or when play-
back is stopped.
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2. Exchange the disc.
3. Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that was in front).
15