Selecting An Audio/Video Source; Selecting Audio/Video Sources On The Ccs - Bosch CCD series Operating Instructions Manual

46 | en
Selecting functions and adjusting settings | Selecting an audio/video source
buttons > and the ENTER button F to
control the audio/video source that is active in
the cabin. The focus of control will switch back
automatically to the cockpit approximately 10
seconds after the last button press.
Notes
The current focus of control is
indicated in the display ("COCK-
PIT" or "CABIN").
The focus of control will also
switch over to the cabin when
you select a different audio/
video source for the cabin.

Selecting an audio/video source

Selecting audio/video sources on the CCS

Selecting an audio/video source for the cockpit
Function Action
Press the RADIO button I
Select the radio
Press the CD button I
Select the CD in the
CCD drive
Press the AUX button I (if
Select AUX/USB
necessary, several times)
Press the VIDEO button I (if
Select the DVD/CD in
the CCS drive or video
necessary, several times)
source 1 or 2
03.2011
You can manually return the
focus of control to the cockpit by
pressing the control knob <.
When you select the navigation
system as the source in the
cockpit, the focus of control will
switch to the navigation unit (see
the chapter entitled "Navigation
functions on the CCS").
Note
–
–
AUX can only selected if the
AUX input has been activated
(see the chapter entitled
"Further system settings").
You can only select USB if a
data storage medium is
connected.
You can only select video
source 1 or 2 if an external
device (e.g. a DVD, TV, or
DVC) is connected.
Robert Bosch Car Multimedia GmbH