Ec Declaration Of Conformity - Grant Vortex 50/90 User, Installation And Servicing Instructions

We declare that the Grant Vortex range of Oil Boilers equipped with Riello RDB burners approved to
EN 267: 1991 satisfy the requirements of the following European Directives:-
1. 89/336/EEC - Electromagnetic Compatibility Directive
Referred to the generic standards EN 55014: 1993, EN 50082: 1: 1992
2. 73/23/EEC - Electrical Equipment Safety Regulations Directive
Referred to the generic standard NO: 3260: The Electrical Equipment (Safety) Regulations: 1994
3. 92/42/EEC - Hot Water Boiler Efficiency Directive
Referred to the generic standard The Boiler (Efficiency) (Amendment) Regulations 1994
(SI 1994/3083)
TERMS OF GUARANTEE
1. The Company shall mean Grant Engineering (Ireland) Limited.
2. The Boiler is guaranteed for a period of 12 months from the date of installation, providing that any work
undertaken is authorised by the company and carried out by an approved service agent.
3. The shell (heat exchanger) of oil boilers supplied by Grant Engineering (Ireland) Limited are guaranteed for a
period of 5 years from the date of installation. All other boiler components, excluding consumables (such as
nozzles and filters), for 1 year from the date of installation.
4. This guarantee does not cover breakdowns caused by incorrect installation, neglect, misuse, accident or
failure to operate this boiler in accordance with the manufacturers instructions.
5. This guarantee is not transferable unless sanctioned by the Company.
6. The Company will endeavour to provide prompt service in the unlikely event of a problem occurring, but
cannot be held responsible for any consequence of delay however caused.
7. This guarantee does not cover labour, handling or shipping.
8. This guarantee applies to boilers installed on the island of Ireland both North and South. Provision for
warranty cover elsewhere is subject to agreement with Grant Engineering (Ireland) Limited.
EFFICIENT HEATING SOLUTIONS

15 - EC DECLARATION OF CONFORMITY

GRANT ENGINEERING (IRELAND) LTD.,
Telephone: (057) 9120089 / 9120352
This manual is accurate at the date of printing but will be superseded and should be
disregarded if specifications and/or appearances are changed in the interests of continued
product improvement.
All goods sold are subject to our official Conditions of Sale, a copy of which may be
obtained on application.
© Grant Engineering (Ireland) Limited 2010. No part of this manual may be reproduced
by any means without prior written consent.
CRINKLE, BIRR, CO. OFFALY.
D247