SYMPTOM
The unit does not operate when
POWER on the front panel is
pressed
Remote control does not
function
Disc cannot be erased
Recorded CD-R/RW disc does
not play in another CD player or
"ERROR" appears in play deck
display
Recording suddenly stops
POSSIBLE CAUSE
No AC power
Wrong deck selected
Sensor blocked
Dead batteries
CD-R disc is in use
CD-R/RW disc not finalized
Input source stopped or paused
Chapter 5 Additional Information
SOLUTION
Make sure AC power is fully
inserted into an AC outlet
Press CD PLAY to control the
play deck; press CD REC to
control the record deck
Remove obstructions from front
panel
Replace both batteries
CD-R discs are not erasable. Use
CD-RW discs
Finalize the CD-R/RW disc in the
unit's record deck. (see page 20)
Recordings will always stop
when the input source is
paused for more than 3
seconds for digital recordings
and 10 seconds for analog
recordings
TROUBLESHOOTING
27
GB