Table of Contents
Advertisement
User Manual
10.4.4 OSD Setup
1) Click on "OSD Setup" option, you can:
Change Standby Image
Change Standby Image: Replace the whole standby image
<Reset to default>: Restore to default Logo image.
<Image File Upload>: Enter or browse the file name and upload the
customized Logo Image. Please refer to remark on screen when select the
file.
You can also adjust the following "Display Option"
Device Information: Show all or Hide all the device information on
standby screen.
(Note:When Device Information set Hide option, the "Overlay Device
Information" & "Screen Saver Setting" will be disabled)
Overlay Device Information: Enable or disable the device information will
be show on top of projection screen when doing projection.
Screen Saver Settings: Enable or disable the screen saver and also
configure the idle time(Minutes). (default is 5 mins)
<Apply >: Press "Apply" button after configuration, and follow the reboot instruction
when applicable.
<Cancel>: Press button to abort action.
54
English
Advertisement
Table of Contents
