Motorola Moto X Pure Edition Quick Start Manual page 48

Connect & transfer
Connect & transfer
Quick start: Connect & transfer
Bluetooth wireless
Wi-Fi networks
USB cables
Share your data connection
Data use
NFC
Your cloud
Phone & tablet
Memory card
Virtual Private Networks (VPN)
Mobile network
Airplane mode
Menu More
Back Next
Wi-Fi networks
Turn Wi-Fi power on/off
Find it: Apps > >
Settings Wi-Fi
turn it on
Note: Swipe down the status bar with two fingers to quickly
turn Wi-Fi on or off.
Connect to networks
To find networks in your range:
1 Tap Apps > >
Settings Wi-Fi
Tip: To show your phone's MAC address and Wi-Fi settings,
tap Menu > .
Advanced
2 Make sure the Wi-Fi switch is turned on.
3 Tap a found network to connect it (if necessary,
enter Network SSID , Security , and
tap ).
Connect
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, tap the network,
and enter the network's password.
Tip: When Wi-Fi is on, your phone automatically reconnects to
available networks it has used before. If a router previously had
no internet connection, your phone will not automatically
connect to it.
Wi-Fi hotspot
Note: This phone supports apps and services that may use a lot
of data, so make sure your data plan meets your needs.
, then tap the switch to
Contact your service provider for details.
You can make your phone a Wi-Fi hotspot to provide portable,
convenient internet access to other Wi-Fi enabled devices.
Note: Keep it secure. To protect your phone and hotspot from
unauthorized access, it is strongly recommended that you set
up hotspot security (WPA2 is the most secure), including
password.
.
Find it: Apps
hotspot
Note: These steps may vary depending on your network.
1 Your phone turns off Wi-Fi and uses the mobile network for
internet access. Tap
Wireless password , and
• Network name: Enter a unique name for your hotspot.
• Security: Select the type of security you want:
• Password: Create a password with at least eight
2 Tap
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices
can connect by entering your hotspot's
> > >
Settings More Tethering & portable
and check Portable Wi-Fi hotspot
Set up Wi-Fi hotspot
WPA2 . For WPA2 , enter a unique password that others
will need to access your Wi-Fi hotspot.
Note: is recommended by IEEE.
WPA2
characters.
.
SAVE
Network name
to set up security:
or
None
,