Flash - Panasonic DBS576 Technical Manual

Section 700 - Operation
Operation
To switch from DP to DTMF dialing:
1. Press the * key or the # key.
Hardware Requirements
• N/A
Related Programming
• FF1: DTMF
• FF2: DP to DTMF (Outgoing)
• FF2: DP to DTMF (Incoming)
Considerations
• N/A

Flash

Description
You can send a flash signal on your telephone to release an outside line and then either automatically
reseize the same outside line or switch to extension dial tone status by pressing the FLASH key.
Trunk programming determines whether your phone reseizes the outside line or switches to extension
dial tone status.
Hardware Requirements
• N/A
Related Programming
• FF1-1: Flash Timer
• FF2: Flash Pattern
• FF2: Flash Key Operation
• FF3: Flash on PROG (Recall)
Considerations
• N/A
576-36-700
Action
DBS 576 (USA) issued October 2000
Chapter 6. DSLT Features
Result
6-31