Download Print this page
McIntosh MQ 101 Owner's Manual
Hide thumbs Also See for MQ 101:

Advertisement

THE MclNTOSH MQ101 ENVIRONMENTAL EQUALIZER
Price $1.25

Advertisement

loading

Summary of Contents for McIntosh MQ 101

  • Page 1 THE MclNTOSH MQ101 ENVIRONMENTAL EQUALIZER Price $1.25...
  • Page 3: Table Of Contents

    90 days from date of pur- from the factory or service agency. This guarantee chase. If such defects occur, Mclntosh Laboratory covers the MQ 101 only, and not its cabinet. THREE YEAR FACTORY SERVICE CONTRACT An application for a FREE THREE YEAR FACTORY 4.
  • Page 4: Installation

    The PANLOC professional mounting design elimi- slightly. (Use two ¾ inch long screws for mounting nates the need for any shelf or bracket. The MQ 101 panels up to ½ inch thick, or two 1¼ inch long screws is supported by its own mounting brackets.
  • Page 5: How To Connect

    40 feet long. The input impedance of the power amplifier should be 47,000 ohms or more. The MQ 101 is added to the circuit between the preamplifier and power amplifier. Connect shielded For best signal to noise ratio when using the MQ...
  • Page 6 Cables with 25 pF per foot may be 40 feet ply power to other equipment in the system. The out- long. The input impedance of the power amplifier let is not switched nor is it fused in the MQ 101. should be 47,000 ohms or more. AC POWER The input attenuation switch on the back panel of the MQ101 should be in the —12 dB position to pre-...
  • Page 7: Using The Front Panel Controls

    TAPE MONITOR frequency loudness. Position 3 is electrically flat. The TAPE MONITOR is used only when the MQ 101 has been connected to the tape monitor facilities of PANLOC the source equipment. The control is used in exactly...
  • Page 8: Performance Limits

    Mclntosh instrument. We promise you that the MQ 101 you buy must be capable of perform- ance at or exceeding these limits or you get your money back. Mclntosh is the only manufacturer that makes this guarantee.
  • Page 9: Technical Description

    Technical Description Design engineers, in the past, have not taken ad- vantage of this opportunity to obtain excellent tran- sient response because of the price that must be paid. That price is a reduction in bass response. There are two ways around this problem of loss of bass.
  • Page 10: Block Diagram

    The MQ 101 in addition to the bass correction also provides correction for mid frequency and high fre-...
  • Page 12 MclNTOSH LABORATORY INC. 2 CHAMBERS ST., BINGHAMTON, N. Y. 13903 607-723-3512 Design subject to change without notice. Printed in U.S.A. 038-669 BE052003...