Table of Contents
Advertisement
COLOUR
OFF
FCC
OFF
DNR
BASIC OPERATION
3. PICTURE MENU :
Press menu key to display main menu. Then select the
picture submenu by CH+/CH- or
VOL+ or
key to enter it.
This menu has several settings which allow you to
control the picture quality. User can select any
parameter in picture menu by pressing CH+/CH- or
/
key and adjust to desired setting by VOL+/VOL-
or
/
key.
BRIGHTNESS : User can adjust brightness to set
bright level of the picture which is displayed on the TV
screen.
CONTRAST : User can adjust contrast level of the
picture which is displayed on the TV screen.
COLOUR: User can adjust colour to set the colours of
the picture which is displayed on the TV screen.
SHARPNESS : User can adjust sharpness to set the
sharpness level of the picture that is displayed on the
screen.
TINT : This is applicable for NTSC playback only. Use
this function to adjust the tint of the picture for NTSC
signal.
DDPI : (Digital Dynamic Picture Improvement)
This feature improves contrast, white level, picture
detail, skin tone effect and improves lower quality
video inputs. With this feature ON you can view the
overall improvement in picture quality. This feature
enables you to split the screen vertically into two parts
in DEMO. With this demo feature you can see the left
half of the picture without picture improvement effect
and right half with picture improvement effect.
FCC (Favorite Colour Control) : It allows you to adjust
the background colour of the picture from red to blue or
vice versa.
DNR : This feature will appear as you scroll down the
cursor in picture menu. If the signal received by the TV
is weak, you can activate DNR feature any static and
ghosting that may appear on the screen . It reduces the
noise in the picture .
10
/ key and press
Advertisement
Table of Contents
