Stagemix For Apple Ipad By Yamaha; Installing The Software - Yamaha M7CL Quick Start Manual

Hide thumbs Also See for M7CL:

Table of Contents

M7CL Quick Start Guide Part 3

Files saved in Studio Manager can have other formats (see page 11 of this guide). If a ﬁ le was saved as a .YSM or

.YSE ﬁ le in V1 of Studio Manager it will not open in V2 or V3. To ensure that no ﬁ les become unusable there are

three versions of M7CL Editor available from the www.yamahaproaudio.com download pages. These relate to the

last V1,V2 and the latest V3 of the M7CL mixer ﬁ rmware. If you have existing V1 Editor ﬁ les saved as .YSM or .YSE

type ﬁ les you need to use the V1 versions. You can then re-save these as .M7C ﬁ les that will load into any version.

If the console is V3 then the newly saved ﬁ le will be upgraded to V3 and you can move on to using V3 Studio Man-

ager and Editor.

Full instructions for installing the software are available from the download pages. The wizards will guide you

through the installation. Use the default settings unless you have particular requirements on where to install

things.

If I don't have access to a M7CL can I still get started and use the

software?

Yes. Once the software is installed correctly you can open the Studio Manager without a console. However you

should understand that the M7CLV3 Editor graphics are not the same as those in the console and that studying

M7CLV3 Editor is not an efﬁ cient way to learn how the actual console appears and works.

Table of Contents