Resetting The Data Value In The Panel Engine Micro - Sony KDL-46NX810 Service Manual

2-2-4. RESETTING THE DATA VALUE IN THE PANEL ENGINE
MICRO
For the models listed in this manual, the Panel Engine Micro must be reset
whenever the BUHT Board, the LCD Panel, the TCON board, or the driver
board is replaced.
11. Press JUMP or OPTIONS on the Remote Commander until
the PEM Service Menu displays.
PEM SERVICE
000 VERSION
MAIN 1.0018W00LA
BOOT
1.002W00LA
DATA 1.017WA46LF
NLD
NLD DATA
QDL NVM
12. Press to move to the 001 DL category.
2
PEM
001
000
KDL-46NX810/55NX810/55NX811/60NX810
33
LD1.00
37
SERVICE
DL
DLCC
0
SERVICE ADJUSTMENTS
13. Press to move to the 001 PRETEND_ID item.
1
PEM
001
001
14. Press 3 to increase the data value to 1.
PEM
001
001
PRETEND_ID
15. After verifying the data value displays, press
WRITE (Save) the changes.
SERVICE
DL
PRETEND_ID
0
SERVICE
DL
1
Data Value
MUTING to
29