Electrolux ICON E30MO75HPS Installation Manual

Built-In Microwave With Drop-Down Door
E30MO75HPS professional series
22"
Allow at least
15" clearance
for door depth
when open
Bottom Duct Assembly
21
max.
30" Built-In Microwave With Drop-Down Door Specifications
Product Weight – 84 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.6 kW
•
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
Amps @ 120 Volts = 13.7 Amps
•
Always consult local and national electric codes.
•
Allow at least 15" clearance for oven door depth when open.
•
Minimum required distance from floor is 36".
•
Minimum 20-1/8" deep oven cutout dimension is critical for proper
•
installation for oven and faceplate to fit flush against cabinet front.
Full oven base of solid plywood or similar material required, capable
•
of supporting 150 Lbs.
Electrolux Major Appliances, N.A.
USA 10200 David Taylor Drive Charlotte, NC 28262
• •
5855 Terry Fox Way Mississauga, ON L5V 3E4
CANADA
• •
E30MO75HPS 02/13
*Note: When used in combination with
another Electrolux ICON
minimum clearance of 2
bottom of Built-In Microwave cutout to top
edge of companion product's faceplate,
leaving a 2"visible gap between both
product faceplates.
30"
23 1 / "
2
28"
11
21 / "
16
Bottom Duct Assembly
Outlet should NOT
120V/60Hz be located within
grounded outlet shaded area
C L
4"
21"
min.
1 / "
2
1
28 / "min.
20
2
29"max.
1-877 -4electrolux (1-877 -435-3287)
•
1-800-265-8352
•
® built-in product, a
1
/ " required from
8
2"
min.
21"
min.
28 1
21 1 / "
2
max.
20 3 / " 29" max.
4
Power
2"
supply
(visible
location
gap)*
(left
bottom
36" min.
rear)
required
distance
to floor
6"
18"
1 / " min.
8
Base must be level and cabinet front must be square.
•
Grounded outlet should NOT be located in shaded area, as indicated.
•
Built-In Microwave is NOT approved to be used under counter.
•
Built-In Microwave can be built in alone or is approved to be used in
•
combination with any Electrolux ICON
and / or Warmer Drawer. (Refer to model-specific Combination Installation
Specification pages on web.)
When used in combination with another Electrolux ICON
•
a minimum clearance of 2-1/8" required from bottom of Built-In Microwave
cutout to top edge of companion product's faceplate, leaving a 2" visible
gap between both product faceplates.
Note: For planning purposes only. Refer to Product Installation Guide on the
web at electroluxicon.com for detailed instructions.
electroluxicon.com
•
electroluxicon.ca
•
© 2013 Electrolux Home Products, Inc.
30 1 / " 24"
8
min. min.
/ "min.
2
20 1 / "
8
min.
Full plywood
base required
to support
150 lbs.
Electric Single Wall Oven
®
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
built-in product,
®