Bottom View - Panasonic BL-C10 Installation & Troubleshooting Manual

Installation/Troubleshooting
1.2.2

Bottom View

Ethernet
®
(LAN) port
DC IN jack
How to Remove the Cable Cover
Push the cable cover to the left, let go of the tab from the unit, and pull it.
1. Push the cable cover to the left, and
8
let go of the tab from the unit.
Tripod Mounting Hole
Used when installing the
camera on a tripod.
FACTORY DEFAULT
RESET Button
Resets settings to default
(see page 84 of the
Operating Instructions in
the Setup CD-ROM).
Cable Cover
After the Ethernet cable
and AC adaptor are
connected, fit the cable
cover to the camera.
2. Pull.