Disc-In-Play Function; Backup Eject Function; Listening To A Disc Already Loaded In The Unit; Display Selection - Clarion db175mp Owner's Manual

CD/MP3IWMA Mode Operations
Disc-In-Play function
As long as the ignition key is turned to the ON
or ACC position, this function allows you to turn
the power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert foreign
objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
• This unit is designed for play of 12cm com-
pact disc only. Do not attempt to use Scm
CD singles in this unit, either with or without
an adaptor, as damage to the player and/or
disc can occur. Such damage will not be
covered by the warranty on this product.
Backup eject function
Pressing the [
~
] button ejects the disc even if
the power to the unit was not turned on. Remove
the disc after it is ejected.
Notes:
• If you force a CD into before auto reloading, this
can damage the CD.
• If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto
reload).
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/MP31
WMA mode. "CD/MP3" will be displayed.
When the unit enters CD/MP3IWMA mode, play
starts automatically.
Note:
• The default display is Main Display (Track No.1 Play
Time).
Loading a CD
Insert a CD into the center of the CD SLOT with
the labeled side facing up. "LOADING" appears
in the display, the CD plays automatically after
loading.
Notes:
• When the unit enters the CD/MP3IWMA mode,
"FILEREAD" will be displayed to check the disc
type and its contents.
• If the inserted disc is a CD-DA format, "CD" will be
displayed for a while. However, if the inserted disc
is a MP3IWMA format, "MP3" will be displayed for
a while. MP3IWMA indicator will be lit on according
to type of file detected.
~
indicator will be lit on if MP3 file is detected.
~
indicator will be lit on if WMA file is detected.
~
Then, the first track will be played automati-
cally.
• If the CD is not inserted easily, there may be an-
other CD in the mechanism or the unit may require
service.
. .
ill]Do~~
• DIscs not beanng the
DIGITAL AUDIO
mark cannot be played
by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Ejecting the CD
Press the
[~]
button, then the CD will be eject-
ed.
Notes:
• If there is no disc loaded, the indication "NO DISC"
appears in the display and return to Radio mode
after 4 seconds.
• If the CD is not removed after ejecting, CD will
be automatically reloaded after 15 seconds and
this will not automatically switch to CD/MP3IWMA
mode.
Pausing play
1. Press the [
~
II] button to pause play. "PAUSE"
appears in the display.
2. To resume CD play, press the [
~
II] button
again.
Display selection
1. You can choose the display type for CD-DA or
MP3IWMA disc by pressing the [0] button.
To select the next type, press the [0] button
again.
DB175MP
15