Installation With Roof Exhaust R500 And Lower Vetnilation Grille Ls300; Installation With Lower And Upper Ventilation Grilles Ls300; Installation Ls300 Or L500 (Nz) - Dometic RMD 8501 Installation Instructions Manual

Instal lation
Installation of lower and upper ventilation
grilles LS300 (or L500 NZ).
LS300
or
L500
(NZ)
Flue kit
3776
H
LS300
or
L500
(NZ)
The bottom of the upper ventilation grille must
be equal to or above the height of the refrige-
rator.
i
Correct mounting of the lower ventilation gril-
le facilitates access to the connections and
functional parts during maintenance.
CAUTION!
An installation other than described will
reduce the cooling capacity and jeopardi-
se the manufacturer's warranty/product
liability.
A
optional ventilation
aperture Ø min 40 mm
Fig. 11
4.3 Installing the ventilation system

4.3.1 Installation LS300 or L500 (NZ)

To install the ventilation grilles cut two rectan-
gles to suit vents in the outer wall of the vehi-
cle (for position of the cuts, see Fig. 13).
1
Cut two rectangles in
the exterior wall of the
vehicle.
2
Seal the mounting
frame making it water-
proof ( does not apply
for mounting frames
with integral seal) and
screw into position.
3
Insert ventilation grille.
4
Install locking slider.
5
Lock ventilation grille.
i
New Zealand only: Please be aware that the
L500 vent grille is equipped with locking
screws instead of sliders.
14
b
a
Fig. 12
14 x
Fig. 13
Fig. 14
Fig. 15
Fig. 16