Wiring Connection; Part List For Installation - Kenwood KMM-U51BT Instruction Manual

Wiring connection

Microphone input jack
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit.
Fuse (10 A)
( 10)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Gray
Brown
Gray/Black
(Mute control wire)
Green
Green/Black
Purple
Blue/White
Purple/Black
(Power control wire/
Antenna control wire)
Red (Ignition wire)
Yellow (Battery wire) Light blue/yellow
(Steering remote
control wire)
Front/ Rear/ subwoofer output
Antenna terminal
To connect the Kenwood navigation system,
refer your navigation manual
To the power control terminal when using
the optional power amplifier or to the
antenna control terminal in the vehicle
To the steering wheel remote control
adapter

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
23
ENGLISH