Makita BO5020 Instruction Manual page 8

ASSEMBLY
Front grip
Install the front grip on the tool so that its
protrusions fit into the matching notches in
the front of the tool. Secure the front grip
using a screwdriver to tighten the screw
through the hole in the front grip.
Installing or removing abrasive disc
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the disc.
To install the abrasive disc, first remove all
dirt or foreign matter from the pad. Then
attach the abrasive disc to the pad, using
the hook-and-loop system of the abrasive
disc and the pad. Be careful to align the
holes in the abrasive disc with those in the
pad.
CAUTION:
Always use hook-and-loop system abrasive discs. Never use pressure-sensitive abrasive
discs.
Installing dust bag
Install the dust bag on the tool so that the
arrow with "UP" indicated on the dust
nozzle points upward.
8