LG CM3330B Owner's Manual page 14

14 Operating
To
Play Press T.
Pause During playback, pressT.
During playback, press Y/
U to go to the next file or to
return to the beginning of the
current file.
Skip
During playback, press Y
2
twice briefly to step back to the
previous file.
When you selects USB function, you can see
messages as follows;
Message
Your device is not supported by
USB
AOA 2.0 (Only charging)
Number of
This unit recognizes your USB.
files
This unit recognizes your iOS device
IPOD
as an known device.
This unit recognizes your Android
ANDROID device supported by AOA 2.0 as
known device.
Any device is not connected to USB
port.
NO USB
This unit recognizes your Android
device as an unknown device.
,
Note
Depending on the type of device, Message will
appear in other way.
CM3330G-DG.DDEULLG_ENG.indd 14
Do this
Cause
,
Note
y If the USB connection has an error, check
these problems as follows;
- Your Android device is not connected
firmly.
- This unit recognizes your Android device as
an unknown device.
- Your Android device is not booted.
y The charging time may vary depending on
your Android device.
y Some Android devices may not be charged.
y You may not control your Android device
from this unit due to malfunction of Android
device.
y Depending on your Android device's
software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.
y If you use an application, make a call, or
send and receive SMS text message, etc. on
Android device, disconnect it from this unit
and then use it.
y Although your device's O/S is ver 4.1 or
even the latest version, you can not charge
it. Because your device is not supported by
AOA 2.0.
y Disconnect your device from USB port in
case of malfunction, although the device's
O/S is ver 4.1(or later).
y While the unit recognizes your android
device, you may see "USB CONNECT" in your
device.
y If you connect your Android device to
USB port while your Android device is
extremely low in the volume, the audio may
not output from this unit. In this case, you
should adjust the volume of your Android
device.
2013-02-21 12:36:16