Cub Cadet CCU410 Instruction Manual page 9

POWER CELL & CHARGER SAFETY
NOTE:
Detailed instructions are packed with
the Power Cell and Charger.
WARNING:
rapid charger to charge the CFC6500
Power Cell. Using any other charger
to charge the CFC6500 Power Cell
may damage the Power Cell and / or
the charger and cause fires,
explosion, hazardous fumes and
possibly burns or other serious injury.
WARNING:
Never expose the Power Cell to
microwaves or high pressures. It may
explode causing serious injury.
Do not store or carry the Power Cell in a
manner in which metal objects could
contact the exposed metal terminals.
Do not place the Power Cell in aprons,
pockets, drawers, tool boxes, etc. with
metal objects, such as, but not limited
to, loose nails, screws, bolts, keys,
coins, staples, foil, etc. Such metal
objects could cause the Power Cell to
short circuit causing fire, explosion, and
hazardous fumes, resulting in personal
injury or property damage.
Never attempt to open, modify,
dismantle, reverse polarity, crush,
puncture or shred the Power Cell for
any reason.
INSTRUCTIONS
Only use a CRC8000
Fire Hazard.
If the housing of the Power Cell breaks,
cracks, swells, or is punctured
immediately discontinue its use and do
not recharge.
Do not charge or use the Power Cell if it
has been dropped or has received a
sharp blow, a heavy weight has been
imposed upon it, has been overheated,
or is cracked, crushed, deformed or
punctured. If a Power Cell has sustained
damage, (as per above, or otherwise)
immediately isolate it in a non-
combustible, safe outside area, remain a
safe distance away but do not leave it
unattended. Such a damaged Power
Cell should be considered and treated
as a potentially thermally unstable,
flammable and hazardous material. If the
Power Cell ignites use water spray,
carbon dioxide, dry chemical or foam
extinguishers to suppress. Avoid
exposure to and inhalation of hazardous
fumes. Contact hazardous materials
authorities for guidance as to
appropriate handling and prompt safe
disposal of damaged Power Cells. Make
arrangements for prompt safe disposal
of a damaged Power Cell per local
hazardous material regulations.
Do not use or charge the Power Cell if it
is wet or shows any evidence of
corrosion.
WARNING:
Power Cell may occur under extreme
usage, charging or temperature
conditions, or if the Power Cell is
damaged, crushed or punctured. This
leakage indicates a failure of the Power
Cell and the Power Cell should be
properly disposed of per local
hazardous material regulations.
9
Leakage from the