Yamaha ISX-800 Owner's Manual page 15

Set the alarm time and alarm type
Top panel
AUTO
1
DIMMER
USB
VOLUME SOURCE ALARM
6 4 17
1
Press and hold ALARM.
The alarm indicator (
2
Press to set the alarm time.
/
Using the remote control
Press / .
3
Select the alarm type with the ALARM TYPE
switch on the rear panel.
For details on alarm types, refer to P. 12.
Rear panel
4
(when alarm types other than BEEP are selected)
Press SOURCE to select music source.
Sources other than AUX can be selected.
Using the remote control
Press Source button to select music source.
If iPod/CD/USB has been selected, connect/insert the audio
source (iPod, audio/data CD, USB device) to the unit.
Notes
• If the selected source is not connected or inserted, the selected track/
folder cannot be played.
• If source cannot be played back at the time set for the alarm (eg. iPod
is not connected), the beep sound is played back.
SOURCE + BEEP
2 SET 2 BEEP
1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
5 2
Alarm time
Alarm indicator
) and set alarm time will flash.
SOURCE+
BEEP
BEEP
SOURCE
5
(when alarm types other than BEEP are selected)
Specify the track, folder or FM station to be played.
If iPod is set as the source:
No settings required.
If CD/USB/FM is selected as the source:
Press PRESET to select the track (audio CD), folder (data
CD/USB devise) or FM station to be played.
Using the remote control
Press PRESET
y
• When iPod is set as the source, the unit plays back the "ALARM
Yamaha DTA" playlist at the set alarm time. If this playlist cannot be
found within the iPod, the unit resumes play from the last track you
played (resume).
• When CD/USB is selected as the source and "0" is set as track/folder
number, the playback resumes from the track you listened to last time
(resume).
• When FM is selected as the source and preset number "0" is set, the
unit resumes broadcasting the last FM station you listened to
(resume).
6
Set the alarm volume by pressing VOLUME –/+.
CD
y
Press / to test the alarm. Press
7
Press ALARM to complete setting the alarm.
The alarm will be set, and the alarm indicator (
light up.
Note
The alarm setting will be erased if the system is turned off without
properly completing it.
USING THE ALARM FUNCTION
/ .
Alarm volume
/ again to stop testing.
) will
13
En