Multitech MTCBA-E-U User Manual page 15

Part B for Windows XP/2003: Associating PC Port with USB Driver
1. If the Welcome to the Found New Hardware Wizard screen – Can Windows connect to
Windows update to search for software? appeared when you were installing the driver, it will
come up here also.
Select No, not this time. Then click Next.
2. The Welcome to the Found New Hardware Wizard screen will appear with the Texas
Instruments UMP Serial Port as the device to be installed. This is the beginning of the Found
New Hardware sequence for the port.
3. Click Install from a list or specific location (Advanced).
Click Next.
4. Please choose your search and installation options screen appears.
5. Ensure that Search for the best driver in these locations is set and click on Search
removable media (floppy, CR-ROM...).
Click Next.
6. A second Windows Logo Testing screen may appear depending on operating system settings.
This screen pertains to the MTS EDGE USB – Serial Port.
Click Continue Anyway.
7. The Completing the Found New Hardware Wizard screen appears.
8. The association between the serial port and the USB driver has been made.
Click Finish.
The third Found New Hardware wizard will start automatically to install the modem inf file.
Multi-Tech Systems, Inc. MultiModem EDGE USB Wireless Modem User Guide
Chapter 3 – Using Your Wireless Modem
15