Installing The Modem Driver In Windows 2000 - Multitech MTCBA-C-U User Manual

Installing the Modem Driver in Windows 2000

Part A for Windows 2000: Installing the USB Driver
1. Connect the USB cable between the MultiModem and the PC.
2. Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and
after a brief delay, the MultiModem Setup – Welcome screen appears. Close the Welcome
screen.
After a brief delay, the Welcome to the Found New Hardware Wizard screen appears. This is
the first of three New Hardware Wizards that will appear.
Click Next.
3. The Install Hardware Device Drivers screen appears referring to the TUSB3410 Serial Port
device.
4. Click on Search for a suitable driver for my device (recommended)
Click Next.
5. The Locate Driver Files screen appears. Click in the Optional search locations: on CD-ROM
drive option.
Click Next.
Multi-Tech Systems, Inc. MultiModem CDMA USB Wireless Modem User Guide
Chapter 2 – Activation and Installation
18