1. VOICE COMMAND SYSTEM OPERATION
4. MOBILE ASSISTANT
The Mobile Assistant feature will
activate Apple's Siri
via the steering wheel switches. To
operate the Mobile Assistant, a
compatible cellular phone must be
registered and connected to this system
®
via Bluetooth
. (P. 50.)
1
Press and hold this switch until you hear
the beeps.
2
The Mobile Assistant can be used only
when the following screen is displayed.
To cancel the Mobile Assistant, select
"Cancel", or press and hold the
steering wheel.
To restart the Mobile Assistant for addi-
tional commands, press the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice com-
mand.
RCF_RC_Navi_U
®
Eyes Free mode
on the
on the
• After some phone and music commands,
the Mobile Assistant feature will automat-
ically end to complete the requested
action.
The volume of the Mobile Assistant can
be adjusted using the "PWR·VOL" knob
or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
INFORMATION
●The available features and functions may
vary based on the iOS version installed
on the connected device.
●Some Siri features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri will inform you
that the function is not available.
●If Siri is not enabled on the cellular phone
connected via Bluetooth
sage will be displayed on the screen.
●While a phone call is active, the Mobile
Assistant cannot be used.
●If using the navigation feature of the cellu-
lar phone, ensure the active audio source
®
is Bluetooth
audio or iPod in order to
hear turn by turn direction prompts.
5
®
, an error mes-
279