Table Of Contents - Janome MyLock 634D Instruction Book

Table of Contents

Important Safety Instructions2
Operating Instruction3
Table Of Contents4
Preparation5
Names Of Parts5
Attaching The Waste Chip Box6
Standard Accessories6
Storing The Accessory Box6
Connecting The Machine To The Power Supply7
Controlling Sewing Speed7
For Your Safety7
How To Turn Balance Wheel8
Opening And Closing The Side Cover8
Opening And Closing The Looper Cover8
The Position Of Thread Guide Bar9
Setting Of Spool Stand9
Attaching The Thread Stripping Disc And Net10
Raising Or Lowering The Presser Foot10
Threading The Machine11
Threading The Lower Looper12
How To Thread The Wolly Nylon/Polyester Thread13
Threading The Upper Looper14
How To Thread The Upper Looper14
Threading The Needle On The Right16
Threading The Needle On The Left17
Changing To Two-Thread Serging18
To Attach The Spreader18
To Remove The Spreader18
Test Stitching19
Starting Sewing19
How To Use Guide Lines19
Sewing Continuously19
Securing Ends20
At The Beginning20
At The End Of Seam20
Thread Tension21
Thread Tension Adjustment21
Correct Tension21
Wrong Tension21
Thread Tension Dial22
Adjustment Of Cutting Width23
Thread And Needle Chart24
Using The Needle On The Right Only25
Using The Needle On The Left Only25
Adjustment Of Differential Feed Ratio28
Changing Needle29
Adjustment Of Foot Pressure29
To Attach The Needle On The Left29
Removing The Presser Foot30
To Deactivate The Upper Knife30
To Activate The Upper Knife30
Attaching The Presser Foot30
Standard Serging31
Rolled Hemming31
Machine Setting33
Adjusting Thread Tension34
Correct Thread Tension34
Picot Edging34
Decorative Overedging35
Gathering35
Standard Setting35
Pin Tucking36
Fabric, Thread And Machine Setting36
Sewing36
Care Of Your Machine37
Replacing The Upper Knife37
Cleaning Upper Knife Area37
Replacing The Light Bulb38
Cleaning The Feed Dog38
Oiling The Machine39
Troubleshooting40
Optional Parts41