System Requirements; Bluetooth Microphone - Phonic AM440D USB-K1 User Manual

SYSTEM REQUIREMENTS

Windows
 Windows™ XP SP2, Vista™, Windows 7 or Windows 8
 Intel™ Pentium™ 4 processor or better
 512 MB RAM (1 GB recommended)
Macintosh
 Apple™ Mac™ OSX 10.5 or higher
 G4™ processor or better
 512 MB RAM (1 GB recommended)
AM440D USB-K

BLUETOOTH MICROPHONE

The USB port for the Bluetooth microphone can be found between
channels 1 and 2. Phonic have included the Bluetooth dongle that
will allow connection to the wireless microphones. Simply push the
USB dongle into the port on the face of the AM440D USB-K and
it will immediately search for Bluetooth microphones in the area.
Up to two Phonic microphones can be connected, routed to
channels 1 and 2. All controls on these channels can be employed
to the corresponding microphone, including gain, equalizer and
all routing to auxiliaries and groups.
1. Connect the UTM wireless dongle to the USB port on the
front of the AM440D USB-K.
2. Turn your wireless microphone on and wait for 5 seconds for
the unit to connect.
To replace the battery of the microphones, simply unscrew
the bottom and slide the battery compartment out. The UTD
microphones require two AA batteries in total.
Battery Compartment
Power Switch
3