Jensen MCD5090 Installation And Operation Manual
Jensen MCD5090 Installation And Operation Manual

Jensen MCD5090 Installation And Operation Manual

Marine cd player / receiver

Advertisement

MCD5090
MARINE CD PLAYER / RECEIVER
Installation and Operation Manual
MUTE
A/PS
MODE
EQ/LD
LOC
BAND
BAND
PUSH
SEL
COMP ACT
DIGITAL AUDIO
INT
RPT
RDM
-10
1
2
3
4
5
MCD5090
marine
+10
6
AUX IN
AUX IN

Advertisement

Table of Contents
loading

Summary of Contents for Jensen MCD5090

  • Page 1 MCD5090 MARINE CD PLAYER / RECEIVER Installation and Operation Manual PUSH MCD5090 MUTE A/PS COMP ACT MODE EQ/LD DIGITAL AUDIO marine BAND BAND AUX IN AUX IN...
  • Page 2: Safety Information

    MCD5090 SAFETY INFORMATION DISC NOTES Compatible Disc Types When Boating Keep the volume level Iow enough to be aware of your surroundings. Table 1: General Disc Information Protect from Water Do not expose the product directly to water, as this can cause electrical shorts, fire or other...
  • Page 3: Installation

    MCD5090 Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is INSTALLATION fully seated and the spring clips lock it into place. Before You Begin Attach one end of the Hex Nut (5mm) perforated support...
  • Page 4 MCD5090 WIRING PIN NO. WIRE COLOR FUNCTION +12V DC SWITCHED (ACC) GRAY FRONT RIGHT SPEAKER (+) GRAY/BLACK FRONT RIGHT SPEAKER (-) WHITE FRONT LEFT SPEAKER (+) WHITE/BLACK FRONT LEFT SPEAKER (-) ORANGE DIMMER EMPTY NO CONNECTION BLUE AUTO ANTENNA OUTPUT...
  • Page 5: Basic Operation

    MCD5090 Auxiliary Input Operation BASIC OPERATION You can connect another audio/video system to the unit using the AUX IN input (20) on the front panel of the unit. Once the device is connected, press the MODE button (5) on the front panel to select “AUX”...
  • Page 6: Tuner Operation

    MCD5090 Preset Scan TUNER OPERATION Select a band (if needed). Press the A/PS button (16) to scan stations stored in the current band. The unit will pause for eight seconds at each preset station. Press A/PS again to stop scanning when the desired station is reached.
  • Page 7: Controlling Disc Playback

    MCD5090 Random Play (RDM 4) CD OPERATION Press the RDM 4 button (12) on the control panel during disc play to play all tracks on a CD in random, shuffled order. Press RDM 4 again to stop random play. PUSH...
  • Page 8: Specifications

    MCD5090 SPECIFICATIONS TROUBLESHOOTING Signal to Noise Ratio..........> 70dB...
  • Page 9 MCD5090...
  • Page 10 ASA Electronics Corporation www.asaelectronics.com www.jensenmarinedirect.com ©2012 ASA Electronics Corporation v.062112...

Table of Contents