Troubleshooting - Garland SET 352 E Instruction Manual

8. TROUBLESHOOTING

Depending on the symptons of the machine, we can detect the probable cause of the problem and solve the
problem:
PROBLEM
The engine stops when started
The blades move slowly, making a
lot of noise and the blades heat up
In case of not solving the problem, take the machine to your nearest service dealer.
To locate your nearest after sales dealer, contact the shop where you bought the machine from.
CAUSE
Not connected to the mains
Cable damaged
Switch damaged
Brushes worn out
The blades are dry
The blades are bent
Cutting tooth or teeth damaged
Cuchilla demasiado apretada o suelta
37/104
ACTION
Connect to the mains
Send machine to after sales service. Do
not repair cable with insulating tape
Send machine to after sales service
Send machine to after sales service
Oil the blades
Send machine to after sales service
Send machine to after sales service
Tighten the nuts
English