Notice For The Blue/White Lead; Parts Supplied - Pioneer AVIC-F10BT Installation Manual

Connecting the System
! Do not connect this lead to the system con-
trol terminal of external power amps.
! Be sure not to use this lead as the power
supply lead for the auto-aerial or aerial
booster. Such connection could cause ex-
cessive current drain and malfunction.

Notice for the blue/white lead

! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp's system remote control term-
inal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the audio source is switched off.
! Do not connect this lead to the auto-aerial
relay control terminal or the aerial booster
power control terminal.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.

Parts supplied

The navigation unit
RDS-TMC tuner
Connector
Extension lead
(for speed signal)
RCA connector
Section
Power cord
USB connector
Extension lead
(for reverse signal)
GPS aerial
Microphone
7
Engb
03