Download Print this page

MTX TP112 Owner's Manual

Mtx audio owner's manual subwoofer tp112
Hide thumbs Also See for TP112:

Advertisement

Quick Links

SPECIFICATIONS- TP112
Diameter of Subwoofer
(1) 12"
Type
Full Range
Frequency Response
33Hz - 22kHz
Nominal Impedance
8 Ohm
Sensitivity (1w-1m)
92 dB
Power Handling (Watts)
150 RMS/300 Peak Power
Crossover Frequency
2.2 kHz
Weight
37 lbs
Dimensions
24.5"H x 14.65"W x 12.5"D
Warranty Statement
MTX TP112 purchased in the USA from an authorized MTX dealer are guaranteed against defects in
material and workmanship for the period of five years from the date product is purchased by the end
user. This warranty is limited to the original retail purchaser of product. Product found to be defec-
tive during that period will be repaired or replaced by MTX at no charge. This warranty is void if it is
determined that unauthorized parties have attempted repairs or alterations of any nature. Warranty
does not extend to cosmetics or finish. Before presuming a defect is present in the product, be cer-
tain that all related equipment and wiring is functioning properly. MTX disclaims any liability for other
incurred damages resulting from product defects. Any expenses in the removal and reinstallation of
products are not covered by this warranty. MTX's total liability will not exceed the purchase price of
the product. If a defect is present, your authorized MTX dealer may be able to effect repairs.
Proof of purchase is required when requesting service, so please retain your sales receipt and take
a moment to register your warranty online at www.mtx.com
One Mitek Plaza, Winslow, IL. 61089
1-800-225-5689 www.mtx.com
21A6965
TP112
OWNER'S MANUAL

Advertisement

loading

Summary of Contents for MTX TP112

  • Page 1 24.5"H x 14.65"W x 12.5"D Warranty Statement MTX TP112 purchased in the USA from an authorized MTX dealer are guaranteed against defects in material and workmanship for the period of five years from the date product is purchased by the end user.
  • Page 2 Instead of using the speaker’s terminal posts, you can use the 1/4” phone jack to make the connection. If your amplifier has an 8 ohm phone jack, you can use speaker cable that has a phone plug on each end to connect the speaker’s 1/4"...