Engine Reinstallation - Suzuki GSF1200S 2001 Service Manual

3-8 ENGINE

ENGINE REINSTALLATION

Reinstall the engine in the reverse order of engine removal.
• Insert the two long bolts from left side. Install the brackets, spacer, bolts and nuts properly, as shown in
the following illustration.
NOTE:
The engine mounting nuts are self-locking. Once the nuts have been removed, they are no longer of any
use. Be sure to use new nuts and tighten them to the specified torque.
"
N . m kgf . m
ITEM
1, 2, 3
50
4, 9
55
5, 6
88
7, 0
23
8
70
LENGTH
Bolt 1, 2
35 mm (1.4 in)
Bolt 3
33 mm (1.3 in)
Bolt 4
55 mm (2.2 in)
Bolt 5
180 mm (7.1 in)
Bolt 6
132 mm (5.2 in)
Bolt 7
50 mm (2.0 in)
Bolt 8
30 mm (1.2 in)
Bolt 9
75 mm (3.0 in)
Bolt 0
25 mm (1.0 in)
Spacer RH A
27 mm (1.1 in)
lb-ft
5.0 36.0
5.5 40.0
8.8 63.5
2.3 16.5
7.0 50.5
NOTE:
When reusing the removed engine mounting bolts ( 4 , 5
and 6 ), apply a small quantity of the THREAD LOCK
"1342" to their threads.
# 99000-32050: THREAD LOCK "1342"
Only for E-28 model; The engine mounting brackets B ,
bolts 9 and bolts 0 are not equipped at the frame down
tubes.